VALUE HAS A VALUE IF ITS VALUE IS VALUED

These are the steps you can follow to remove Happy99.exe

Steps marked optional are not absolutely necessary and are completely safe to skip. If you’re not comfortable with DOS, get someone knowledgeable to help you with this. I cannot make guarantees of perfect safety since its a manual removal, Perform these at your own risk. If you have Windows NT, you don’t have to follow the removal steps.

1. Click Start, then Shut Down, then “Restart Computer in MS-DOS mode”, then click Yes. It’s important to exit Windows in order to be able to replace the file WSOCK32.DLL which Windows normally has in use.

2.At the DOS prompt type this exactly and press enter at the end of each line:

CD \WINDOWS\SYSTEM

3. Delete SKA.EXE and SKA.DLL by typing

DEL SKA.EXE
DEL SKA.DLL

If you get “File not found” you’re either not infected or in the wrong directory. Make sure you’re in your Windows System directory; check to see if you followed step 2 exactly.

4.Copy WSOCK32.SKA to WSOCK32.DLL by typing

ATTRIB -R WSOCK32.DLL
COPY WSOCK32.SKA WSOCK32.DLL

Answer “Yes” if it asks if you want to overwrite WSOCK32.DLL.

WSOCK32.SKA is a backup of the original WSOCK32.DLL. You are replacing the modified DLL with the original. If you get a “Sharing violation” make sure you followed step 1.

5.Optional Delete WSOCK32.SKA by typing

DEL WSOCK32.SKA

You can leave WSOCK32.SKA on your system. It is a copy of your original WSOCK32.DLL Do not delete WSOCK32.SKA if you are unable to replace WSOCK32.DLL with WSOCK32.SKA.

6.Return to Windows by typing

EXIT

7.Optional Delete Windows Registry Key.
Click Start, then Run, then type regedit in the text box, then click OK. Click HKEY_LOCAL_MACHINE, then Software, then Microsoft, then Windows, then CurrentVersion. Under RunOnce check for SKA.EXE and select it if it is there. Press delete and then click Yes. Close Regedit. Don’t change anything else without making a backup of the registry first. If you don’t find SKA.EXE in the registry, it doesn’t mean you’re not infected. SKA.EXE is only added to the registry if HAPPY99.EXE is unable to modify WSOCK32.DLL when you run it. Also, you’ll only find it in the registry if you haven’t rebooted since you ran HAPPY99.EXE.

8.Optional Choose Start, Programs, Accessories, Notepad, choose File, then Open then type C:\WINDOWS\SYSTEM\LISTE.SKA in the File Name box. Warn the people on the list, then delete LISTE.SKA. Make it clear to the people you warn that they won’t be infected unless they ran happy99.exe, to avoid alarming them unnecessarily. If you haven’t sent out any infected e-mails, there won’t be a LISTE.SKA.

9. Optional Delete the HAPPY99.EXE file. The location of HAPPY99.EXE will vary depending on where you saved it. You can delete it simply by dragging it to the Recycle Bin from within Windows or whatever method you prefer. You may still have some messages with HAPPY99.EXE attached in your mailbox. These cannot do anything unless you run them. You can delete them if you want to or just ignore them. 10.Optional If you aren’t sure whether WSOCK32.DLL is infected, choose Start, then Find, then “Files or Folders”. Then type WSOCK32.DLL in the “Named” box. In the “Look in” box choose drive C: or whatever drive you have Windows on. In the “Containing Text” box type “ska.dll” without the quotes. Then click “Find Now”. If you don’t find any files, that means that wsock32.dll isn’t the modified version. If you don’t have the modified WSOCK32.DLL, the virus has no way to attach to e-mails, even if you have SKA.EXE, SKA.DLL, and WSOCK32.SKA in the Windows System folder. If you have SKA.EXE in the RunOnce registry section, and you haven’t deleted SKA.EXE, then the virus will try to modify WSOCK32.DLL the next time you restart the computer.

chrome://browser/content/browser.xul – Opens another Firefox inside a tab in the the existing Firefox window.

chrome://browser/content/preferences/preferences.xul - Opens the Options dialog box inside the Firefox tab.

chrome://browser/content/bookmarks/bookmarksPanel.xul - Opens the “Bookmarks Manager” inside a tab in the Firefox window.

chrome://browser/content/history/history-panel.xul – Opens the History Panel in the Firefox tab.

chrome://mozapps/content/extensions/extensions.xul?type=extensions - Opens the Extensions window in the current tab.

chrome://browser/content/preferences/cookies.xul – Opens the “cookies window” inside a tab in the Firefox window.

chrome://browser/content/preferences/sanitize.xul – Opens the “Clear Private Data” window inside the current tab.

chrome://browser/content/aboutDialog.xul – Opens the “About Firefox” Dialog box inside the tab.

chrome://browser/content/credits.xhtml – Opens a scrolling list of firefox contributors. The one’s who we must thank for creating Firefox

chrome://global/content/alerts/alert.xul - Dancing Firefox.

Follow this steps to locate all the mveo.exe and jay.exe files,
1. open windows explorer window
2. click tools then click folder options
3. select view tab
4. on the hidden files and folders menu tick on show hidden files and folders.
5. uncheck hide extensions for known file types
6. uncheck hide protected operating system files (recommended)
7. click apply then OK

Next we will have to remove the jay.exe and mveo.exe files
1. Press ctrl+alt+del to open taask manager
2. In the processes tab look for the mveo.exe and end process.

To delete all the jay.exe and mveo files, search for it using the search for files and folder option in the start menu.
1. type jay.exe in the searchbar
2. click more advanced option
3. put a check on search hidden files and folders
4. then click on start search
5. delete all jay.exe entries
6. repeat steps 1-5 to search for mveo.exe
7. also delete autorun.inf file

To delete registry entries
1. click on start
2. click on run
3. in the run text box type regedit
4. press ctrl+f and type in the textbox jay.exe
5. delete all entires having jay.exe entries
6. press F3 to search the next entry.

note: if an entry is in c:\windows… edit the value and go to the end of the string and
delete only the jay.exe text on the end of the string

To edit the IE windows back to its original name:
1. open regedit
2. press ctrl+f
3. type in the searchbar window title
4. If the value that appears has the jaymyka.wen9.com value, change it to Internet Explorer
note: this would be the title bar of your Internet Explorer.

After all of these steps are done:
try to look again for the jay.exe and mveo.exe files using the search for files and folders application of windows.

after deleting all those files restart your computer.

To remove MyMP3.vbs just follow the below procedure:

1. First, temporarily disable your system restore

2. Restart your computer

3. boot in safe mode

4. Open your registry editor Start –> Run –> type regedit

5. Go to this key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

6. Delete value with data C:\WINDOWS\MyMP3.vbs

7 .We will now have to delete all the related files, doing this manually and a pain even for expert users so I will provide a batch code so you can remove all files easily.

This virus/worm installs itself in autorun.inf and once double click it will spread itself unto your system. Furthermore, it copies itself through all the shared folders on your computers throughout the network and installs itself in the registry entries remotely.

Here are indication that your computer is infected with this virus.

• This virus/worm blocks the task manager

The worm changes the registry to prevent running task manager and editing registry for harder detection.

• It automatically restarts the computer when you try to go to the command prompt.

• It duplicates itself to different locations of the shared folders. The duplicated virus/worm uses a FOLDER icon with an .exe file extension. WARNING! DO NOT double click these folders.

• It autostart via registry keys Windows->Run and add itself to WinNT->WinLogon->Explorer.exe

How to remove the virus

You can use NOD32 or any strong antovirus programs to remove this virus but if you don’t have a anti-virus or your antivirus can’t remove this virus try following the steps below to remove it manually.

• Boot your system in Safe Mode Command Prompt Only

• After you log-in the command prompt will be opened (LOG-IN AS ADMINISTRATOR).

• Type CD C:\WINDOWS\SYSTEM32 (I assume that your Windows System files are located at Drive C)

• Type DIR /ah, this will display all hidden files on this directory folder. You will see the following files which is used by the virus to spread itself: AUTORUN.INI, BLASTCLNNN.EXE, and SCVHOST.EXE

• Type ATTRIB -H -R -S SCVHOST.EXE

• Type ATTRIB -H -R -S BLASTCLNNN.EXE

• Type ATTRIB -H -R -S AUTORUN.INI

• Type DEL SCVHOST.EXE

• Type DEL BLASTCLNNNN.EXE

• Type DEL AUTORUN.INI

• Type CD\

• Type ATTRIB -H -R -S AUTORUN.INF

• Type DEL AUTORUN.INF

After following the steps on removing the virus/worm files, the virus should now be removed from the registry of your system.

• At the command prompt type REGEDIT and press ENTER key. This will run the Registry Editor

• From the registry, look for the keys: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run, you will see an entry Yahoo! Messengger (it’s spelled like this) with a value c:\windows\system32\scvhost.exe, Delete this entry.

• Look again for the key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon, there’s an entry named: SHELL, it has a value = Explorer.exe SCVHOST.EXE , DON’T delete this entry!!! Just edit this entry and REMOVE the SCVHOST.EXE so that Explorer.exe will be the only value that remains from this registry entry.

After carefully following all the steps restart your computer on normal mode and the virus should now be gone.

C25:

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Pin Out (electrical connections)

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Languages:

*#0000#+green phone – choose automaticaly
*#0001#+green phone – English
*#0030#+green phone – Greek
*#0031#+green phone – Netherlands
*#0032#+green phone – French
*#0034#+green phone – Spanish
*#0039#+green phone – Italian
*#0049#+green phone – German
*#0090#+green phone – Turkish

How to change PIN:

**04*old PIN*new PIN*new PIN#

How to check simlock status

*#0606# and then press left soft-key, you will see strange characters, then text (”brak blokad”). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clicking on left key (you will see IMEI and software version).

S4:

Monitor Mode – how to activate:

Press left soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press left soft-key and in order 7684666 and red phone at the end (monitor mode has been activated). To read information from Monitor Mode – press left soft-key, then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch off the phone. You must activate it again if you want.

How to see date of software:

Press left soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then press twice left soft-key, 98, left soft-key, 7684666, red phone (activates Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98, left soft-key, 7684666, hang up (red phone) >abck to “normal” and then left soft-key, 56.

S6, S8:

If you add to phonebook under ‘own phone number’ +12022243121 with namez (for example MMI), then you will see something smile.gif

S10, E10:

In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.

S15e:

Monitor Mode:

Code: *#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone button until it code disapears.
Menu 3.3.4 Choose frequency.
Menu 3.3.4.1 Automaticaly.
Menu 3.3.4.2 Choose GSM-900
Menu 3.3.4.3 Choose GSM-1800

Menu 10.1 MS info
Menu 10.2 Soft date
Menu 10.2.1 Software version.
Menu 10.2.2 EEProm version.
Menu 10.3 Tst and product info.
Menu 10.3.1 Handware data.
Menu 10.3.2 Date of manufacture
Menu 10.3.3 Service date
Menu 10.3.4 Date of repair.

S25:

Enhanced Full Rate
*#3370# turns on
#3370# turns off

Haft Rate Mode
*#4720# turns on
#4720# turns off.

Languages:

*#0000#+green phone – choose automaticaly
*#0001#+green phone – English
*#0030#+green phone – Greek
*#0031#+green phone – Netherlands
*#0032#+green phone – French
*#0034#+green phone – Spanish
*#0039#+green phone – Italian
*#0049#+green phone – German
*#0090#+green phone – Turkish

How to change PIN2?

**04*old PIN2*new PIN2*new PIN2#

What is my software version?

Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key.

How to extend battery life:

IrDA – turn on only when you need.
Turn off automatic network search (6-3)Turn off Vibration alarm.

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

S25, M35, S35, C35

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Motorola 920
—————

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

The 54# Tip:

Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.

Motorola 930
————–

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola 930

The 54# Tip:

Type 1#, 2#……..54# on the keypad (when you’re not in the menu) to get the phone number used for with this key when speed dialing.

Motorola 6200
————–

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

UK (Orange)
AU

What’s the use of RBS:

Get Distance From Base Station – Place a call, when it is answered, press [MENU] until ‘Eng Field Option’ is displayed, press [OK], select ‘Active Cell’, press [OK], press [MENU] until ‘Time Adv xxx’ appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Get Signal Quality – press [MENU] until ‘Eng Field Option’ is displayed, press [OK], select ‘Active Cell’,press [OK], press [MENU] until ‘C1? appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

Pin Outs

Numbered left to right, keypad up, battery down

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink – Complimentary data (CD) (input)
5. Uplink – Return data (RD) (output)
6. GND
7. Audio Out – on/off
8. Audio In
9. Manual Test – ???
10. Battery Feedback
11. Antenna connector

Motorola 7500
————-

(Note: pause means the * key held in until box appears) To activate RBS type: [pause] [pause] pause] 1 1 3 [pause] 1 [pause] [ok] You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

IT (model: F16 HW: 5.2 SW: 2.1)

Pin Outs
Numbered right to left, keypad up, battery down looking

1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin

Motorola 8200
————–

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE

Get Signal Quality – press [MENU] until ‘Eng Field
Option’ is displayed, pre

ss [OK], select ‘Active Cell’,
press [OK], press [MENU] until ‘C1? appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink – Complimentary data (CD) (input)
5. Uplink – Return data (RD) (output)
6. GND
7. Audio Out – on/off
8. Audio In
9. Manual Test – ???
10. Battery Feedback
11. Antenna connector

Motorola 8400
————-

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink – Complimentary data (CD) (input)
5. Uplink – Return data (RD) (output)
6. GND
7. Audio Out – on/off
8. Audio In
9. Manual Test – ???
10. Battery Feedback
11. Antenna connector

Motorola 8700
————–

*#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

AU, IT, SG, DE, ES, ZA

What’s the use of RBS:

Get Distance From Base Station – Place a call, when it
is answered, press [MENU] until ‘Eng Field Option’ is
displayed, press [OK], select ‘Active Cell’, press [OK],
press [MENU] until ‘Time Adv xxx’ appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality – press [MENU] until ‘Eng Field
Option’ is displayed, press [OK], select ‘Active Cell’,
press [OK], press [MENU] until ‘C1? appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Motorola CD 160
—————

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola CD 520
—————-

Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.

Motorola d460
————–

#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the ‘Eng
Field Options’ function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

Get Signal Quality – press [MENU] until ‘Eng Field Option’ is displayed, press [OK], select ‘Active Cell’, press [OK], press [MENU] until ‘C1? appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

If you are starting to notice that your Firefox is running slow then it is because your Firefox is eating too much ram.

Even the best browser is not perfect, but the good thing about Firefox is that you have the luxury to fix some of it’s troubles and tweak it’s settings.

Of course, the best way to fix issue is to upgrade your ram stick, but what if you don’t have the budget for the upgrade? here is a very quick and simple trick to limit your Firefox ram usage.

1. Type in about:config on your firefox address bar. It will will show a list of configuration but be careful on modifying any value. Don’t touch anything that you don’t know.

2. Scroll down and look for browser.cache.disk.capacity

Might you your computer have facing this and the sound is annoyed. If the computer restart itself as a habit randomly or a in a time cycle then that could be done by malicious virus inside your system

• A virus:

You need to make your computer virus guard up to date and make sure the virus program working properly . Also you need to be assuring that the antivirus program hefty enough for beating at least 99% viruses.

Here I’m trying to consolidate several reasons for a computer restart itself without knowing the user.

• Downloaded updates need to install

A computer can be restart because automatically downloaded an update package needs install its updates and work out this by itself restarting the computer. Probably these could be malicious programs.

• Overheating:

Overheating of the parts also cause for this kind of matter. In fact the proper response of a computer to overheating is the power off. Nothing is gained by restarting. However overheating could cause the BIOS or power supply to malfunction causing it to restart.

You can improve the airflow through the machine or invest in a water-cooling system. These are favored by gamers, who put a lot of stress on machines heating them up.

• Microsoft Auto Update:

Microsoft Auto Update can force a reboot to the after countdown (Many pc's are set to do this at 3am by default) if the update requires a dll reload/change.

• Remotely Shutdown:

Also someone can use shutdown -i which is a command to remotely shutdown a computer all they would need is an IP address (Internet protocol Address).

The word Bandwidth has several related meanings, here is the list of means of Bandwidth in several phases

• Bandwidth (Computing) or digital bandwidth

A rate of data transfer, throughput or bit rate, measured in bits per second

• Bandwidth (signal processing) or analog bandwidth, frequency bandwidth or radio bandwidth:

A measure of the width of a range of frequencies, measured in hertz

• Spectral line bandwidth:

The width of an atomic or molecular spectral line, measured in hertz

Bandwidth can also refer to some other specific areas too:

• Bandwidth (linear algebra)

The width of the band of nonzero terms around the diagonal of a matrix

• In kernel density estimation

Bandwidth describes the width of the convolution kernel used

• In business jargon

The resources needed to complete a task or project

• Bandwidth (radio program)

A Canadian radio program

Computers use IP addresses to locate and talk to each other on the Internet. It is the unique identifier of a computer on the net.

A dynamic IP is an address that is assigned your computer temporarily by ISP when you connect to the internet

For the duration of you connected it will remain the same IP address but when you disconnect and reconnect you will probably be given a new (different) IP address. The IP address you had before will be given to someone else.

A static IP address is an IP address that is assigned to you computer by an Internet service provider (ISP) to be its permanent address on the Internet. Every time you’re connected the same IP address will be assigned.

If you need to make your dynamic IP address into static IP probably you have to contact your ISP (Internet service provider) and ask them for assign you a static IP. So you can have an IP address permanently assigned to you which you can use every time you are connected.

Making your IP address static cannot done yourself because an IP address needs to be globally unique, you can't just pick one for yourself as you desire. It needs to be assigned to you by your ISP.

• Advantages of having Dynamic IP:

1. If you have a hole in your firewall and a dynamic IP, then every time you disconnect and reconnect any hacker who found you by your IP address on the first visit, will much more difficult to find you again because your address will be different.

2. Fixing IP bans from Forums, chartrooms and etc.

3. Override Time limitations which are depend on the IP address (I.e. Rapidshare).

• Advantages of having Static IP:

The only reason I know why you would need a static IP is if you want other users to be able to connect to your computer through internet. (I.e: Web server)